Report Name: Risk Assessment: SADA (example)
File Name: EarthSoft.Reports.Library.18735.dll
Dependencies: N/A
Software: EQuIS Professional and EQuIS Enterprise
Source: EQuIS Professional install
Language: English
Output Type: comma-separated text file (.csv) and a text file with configuration info (.sdx)
Description: This is a report that will automatically interface with the University of Tennessee Knoxville’s Spatial Analysis and Decision Assistance (SADA) Software.
Installation Instructions: This report assembly is part of the EQuIS Professional installation. No additional installation steps are necessary.
Overview:
This report requires SADA to work.
The exported fields will supply the following fields:
Easting, 1
|
Northing, 2
|
Depth, 3
|
CAS, 4
|
Name, 5
|
Value, 6
|
Detect, 7
|
Media, 8
|
Date, 9
|
Source Tables DT_FIELD_SAMPLE, DT_LOCATION, DT_RESULT, DT_SAMPLE, DT_SDG, DT_TEST, RT_ANALYTE, RT_GROUP, RT_MTH_ANL_GROUP, RT_MTH_ANL_GROUP_MEMBER, RT_REMAP_DETAIL, RT_REMAP_DETAIL
Report Parameters *
|
Location
|
|
Individual(s)
|
Parameter for selecting individual locations.
|
Group(s)
|
Parameter for selecting location groups.
|
Sample
|
|
Type(s)
|
Select one or more sample types.
|
Date Range
|
Section to select the start date, end date, most recent sampling, and the option to use date range to select the most recent sampling events.
|
Matrix(es)
|
Select one or more sample matrix.
|
Task(s)
|
Select one or more tasks.
|
Delivery Group
|
Parameter for selecting the sample delivery group.
|
Depth
|
Section for selecting the minimum and maximum start and end depths as well as depth unit
|
Minimum Start Depth
|
If a value is entered, only samples that start (DT_SAMPLE.START_DEPTH) above that value will be included. Sample with null START_DEPTH will be excluded.
|
Maximum End Depth
|
If a value is entered, only samples that end (DT_SAMPLE.END_DEPTH) below that value will be included. Sample with null END_DEPTH will be excluded.
|
Unit
|
Select the desired unit for sample depth min/max.
|
Test
|
|
Method(s)
|
Select one or more test method
|
Fraction(s)
|
Select one or more fraction
|
Column Number(s)
|
Select one or more column number
|
Type(s)
|
Select one or more test type
|
Lab Matrix(es)
|
Select one or more lab matrixes
|
Prep Method(s)
|
Select one or more prep methods
|
Result
|
|
Analyte
|
Section for selecting analytes and/or analyte groups
|
Unit
|
Selection for report result units
|
Type(s)
|
Select one or more result type
|
Detect Flag(s)
|
Select one or more options for detect flag.
|
Non-Detect Multiplier
|
Enter the desired non-detect multiplier value.
|
Non-Detect Symbol
|
Enter the desired non-detect symbol ("< ?", "ND", ...). "?" will be replaced with reporting limit multiplied by non-detect multiplier.
|
Non-Detect Qualifier
|
Enter the desired non-detect qualifier (e.g., "U") to have that qualifier override the DETECT_FLAG column.
|
Reportable
|
Select one or more options for reportable result.
|
Validated
|
Selection for whether the result is validated or not
|
Reporting Limit
|
Select which reporting limit you desire to use (reporting_detection_limit, method_deteciton_limit, etc.)
|
|
* This report includes the hidden parameter Sample\Geologic Unit, that could affect the output of the report.
Consult an EQuIS administrator if these parameters should be visible or use different default values in a published report (a report
that allows saving of user reports). These paramaters cannot be viewed or changed in unpublished reports outside of a
report parameter file.
|